CONTROL PANELS

BFT ALPHA – 230v
Control panel for single 230v motor. Suitable for; Swing gates,
Sliding gates, Sectional and roll up doors.
Easy to follow panel with clear L.E.D. display, Dip switch and
potentiometer settings. 2 Step logic.

Features:
N/O contact for start.
N/C contacts for safety, stop and limit switch inputs.
Run time adjust, Auto close 0 – 100 seconds.
24v AC output for photo cells etc.
10 pin radio receiver adaptor.
(No force adjustment)
Ped input / 2 channel radio.

BFT LIBRA – 24v
Control panel for one or two 24v electro-mechanical motors.
Suitable for one or two swing gates.
LCD display with push button programming and Auto set mode.
Built-in BFT rolling code radio receiver.

Features:
As Alpha above, plus;
Force adjustment.
Slow down.
Pedestrian opening.
MA safety circuit.
Open command.

BFT ALTAIR P – 230v
Control panel for one or two 230v electro-mechanical motors.
Suitable for one or two swing gates.
LCD display with push button programming.
Similar to Libra panel (above) but for 230v motors.
Ped command.
Open command / close command.

BFT RIGEL 5 (pictured right)
Control panel for one or two 230v motors (max 375w) with
independent force adjustment. Hugely popular control panel for
use with swinging and sliding gate motors.
Every requested function at your finger tips and very easy to use.
The Rigel 5 is supplied with all our hydraulic kits and is the
professional installers favourite.

Features:
Separate start commands. (Enter and Exit)
Separate Open and Close commands.
Hold open facility on latching Open command.
N/C Inputs for P/cells, block and safety edge.
Open and Closed limit switch inputs for 2 motors.
12v Lock output and Reverse blow for lock release.
2 or 4 step logic.
Optional plug in: Radio receiver / Traffic light board.
Holding closed: Hourly pulse for hydraulic motors.
Run time adjust: 0 – 100 seconds or 40 – 180 seconds.

SSR 5
Traffic light control board for Rigel 5 panel. (pictured right)

BFT LEO
Control panel for 230v Sliding gate motor (ICARO) and Barrier (MOOVI). The Leo panel and encoder allows accurate control with an impressive list of features, including the ability to run a pair of sliders or barriers in tandem.

Features:
Push button programming is achieved by scrolling through a
comprehensive menu on the L.C.D. display. Auto-set or engineer set
values can be utilised to best suit individual applications.