GATE SAFETY
FLC 130 PHOTO CELLS
Miniature surface mounting photo electric cells.
A transmitting and receiving photo cell pair that
provide both N/O and N/C contacts over a 25mtr range.
These neat photo cells measure just 80mm x 32mm and
are included in a majority of our automation kits. (24v
AC power).
PT 130 PHOTO CELLS COVERS
Vandal resist covers & CC130 aluminium posts available
– see below.
FLC 50 PHOTO CELLS
Flush fitting, transmitting and receiving photo cell pair
with a full 30mtr range. N/O and N/C contacts. Circular
case with cover and anti dazzle lens. ( 24v – 31V
AC power).
C50 steel cases & CC50 aluminium post available –
see below.
Cabling required: 2 Cores to transmitting cell (power)
/ 4 cores to recieveing cell (power + signal)
PHOTO CELL POSTS
Smart extruded aluminium posts for both FLC 130 and
FLC 50 Photo cells provide the neatest solution to fitting
free standing photo cells.
P 44 WIRELESS PHOTO CELL
A hard wired receiving cell coupled to a battery powered
transmitting cell. If you cannot get a cable to both sides
of the entrance this is the solution.
Long life PP3 battery provides 12 – 18 months
life in these low consumption photocells. The transmitting
photo cell has an input for a safety edge and can be
mounted on a moving gate to provide a wire free safety
edge connection to the control panel.
(See CM2000 safety edge)
CM 200 SAFETY EDGE
Mechanical safety edge for sliding gates. This safety
edge has the advantage of accurate sensitivity and a simple
action.
Utilising a taut steel cable positioned within a collapsible
rubber edge which triggers an integral micro switch with
N/O and N/C contacts.
A simple and reliable system which can be interfaced
with the P44 photo cell (above) for wire free connection
to the panel.
LOOP DETECTORS
Click
here for details on loop detectors.
|
